- No.9 Jiansheyi Road, Xiaoshan District, Hangzhou, Zhejiang,CHINA
- [email protected]
- +8613065722186
Circular Washer Stainless Steel 304 Fastener Round Washer
Circular washer, also known simply as a washer, is a thin, flat, disc-shaped component used in conjunction with screws, bolts, or nuts to distribute the load and prevent damage to the material being fastened. Washers can also help to reduce vibration and improve the overall performance of the fastening system. The circular shape of the washer allows it to evenly distribute the force of the fastener over a larger area, which helps to prevent the fastener from pulling through the material or becoming damaged. Washers can be made from a variety of materials, including metal, plastic, and rubber, and come in a range of sizes and thicknesses to accommodate different types of fasteners.
A fastener circular washer is primarily used to distribute the load and prevent damage to the material being fastened. When a screw, bolt, or nut is tightened, it can apply a lot of force to a small area, which can cause the material to deform, crack, or otherwise become damaged. A washer is placed between the fastener and the material to spread the load over a larger area, which helps to prevent damage to the material and ensures that the fastener stays securely in place. Washers can also help to prevent corrosion and reduce vibration in the fastening system. In some cases, a washer may be used to adjust the spacing or alignment of the fastener. Overall, the use of a fastener circular washer can help to improve the performance and longevity of a fastening system.
201,304,316,316L,316TI,321,B8,B8M,2205,2520,660,Aluminum materials,Cast Iron,semi-stamping and etc.
Blackening and Oxidation,Plating, Paint Spraying,Laser Carving,Polishing, Burring and etc
Yes
Fine Finishing
What sizes does fastener circular washer have?
Fastener circular washers come in a wide range of sizes to accommodate different types of fasteners and applications. The size of a washer is typically determined by its outer diameter (OD), inner diameter (ID), and thickness. The OD of a washer is the distance across the widest part of the washer, while the ID is the distance across the center hole. The thickness of the washer is the distance from the top to the bottom surface.
Some common sizes of fastener circular washers include:
- #4: OD of 0.210 inches (5.33 mm), ID of 0.110 inches (2.79 mm), thickness of 0.020 inches (0.51 mm)
- #6: OD of 0.250 inches (6.35 mm), ID of 0.140 inches (3.56 mm), thickness of 0.020 inches (0.51 mm)
- #8: OD of 0.312 inches (7.92 mm), ID of 0.173 inches (4.39 mm), thickness of 0.020 inches (0.51 mm)
- #10: OD of 0.375 inches (9.53 mm), ID of 0.197 inches (5.00 mm), thickness of 0.032 inches (0.81 mm)
- 1/4″: OD of 0.500 inches (12.70 mm), ID of 0.281 inches (7.14 mm), thickness of 0.049 inches (1.24 mm)
- 3/8″: OD of 0.750 inches (19.05 mm), ID of 0.406 inches (10.31 mm), thickness of 0.065 inches (1.65 mm)
- 1/2″: OD of 1.000 inches (25.40 mm), ID of 0.531 inches (13.49 mm), thickness of 0.083 inches (2.11 mm)
Note that these sizes are just examples and that the actual dimensions of a fastener circular washer can vary depending on the manufacturer and the application. It’s important to choose the right size washer for the fastener being used to ensure proper performance and safety.
©2023. Yiwu Langqiu All Rights Reserved.
