- No.9 Jiansheyi Road, Xiaoshan District, Hangzhou, Zhejiang,CHINA
- [email protected]
- +8613065722186
Cross Self Tapping Screw Flat Head Dovetail End Fastener Screw
A cross self-tapping screw is a type of screw that is designed to tap its own threads into a pre-drilled hole. The screw has a pointed end that allows it to pierce through the material being fastened, and a threaded shaft that allows it to create its own threads as it is screwed in.
The “cross” in the name refers to the screw’s head, which has a cross-shaped recess that is designed to be used with a Phillips head screwdriver. This type of screwdriver has a tip that fits into the recess and allows the user to apply torque to the screw to turn it.
Cross self-tapping screws are commonly used in a variety of applications, such as in woodworking, metalworking, and plastic fabrication. They are often used to attach materials together that are too thin to accommodate a regular screw with a nut or washer, or in places where it may be difficult to access the other side of the material being fastened.
The diameter of the screw is indicated by a number, and the length of the screw is indicated by the length of the shank. For example, a #6 x 1 inch screw has a diameter of 0.138 inches and a length of 1 inch.
It’s important to select the appropriate size and length of screw for your specific application to ensure proper fastening and prevent damage to the material being fastened.
201,304,316,316L,316TI,321,B8,B8M,2205,2520,660,Aluminum materials,Cast Iron,semi-stamping and etc.
Blackening and Oxidation,Plating, Paint Spraying,Laser Carving,Polishing, Burring and etc
Yes
Fine Finishing
What are the specifiactions for cross self tapping screw?
Cross self-tapping screws are a type of fastener that are commonly used in construction and DIY projects. The specifications for cross self-tapping screws may vary depending on their intended application and the manufacturer, but here are some general specifications that may be useful:
Size: Cross self-tapping screws come in a range of sizes, from very small to very large. The size of the screw is typically specified in terms of its diameter and length.
Material: Cross self-tapping screws are usually made from steel, but they can also be made from other materials such as stainless steel, brass, or aluminum. The material used for the screw will depend on the intended application and the environment in which it will be used.
Head type: Cross self-tapping screws can have different head types, such as flat head, pan head, or oval head. The head type may be selected based on the type of tool that will be used to drive the screw and the aesthetic requirements of the project.
Drive type: Cross self-tapping screws have a cross-shaped indentation on the head that is designed to be driven by a Phillips head screwdriver. The size of the cross-shaped indentation may vary depending on the size of the screw.
Thread type: Cross self-tapping screws have a thread that is designed to tap its own hole as it is driven into the material. The thread type may vary depending on the intended application and the material being used.
Point type: Cross self-tapping screws have a point that is designed to help the screw tap its own hole as it is driven into the material. The point type may vary depending on the intended application and the material being used.
©2023. Yiwu Langqiu All Rights Reserved.
